“三线一单”促进四川省高质量发展

过去40年来我国经济建设取得了举世瞩目的成绩,但是也留下了很多生态环境问题。目前我国经济已经由高速增长阶段转向高质量发展阶段,但高质量发展缺乏指标体系和具体路径。“三线一单”是一套生态环境分区管控体系,其主要目的是统筹地方社会经济与环境保护的矛盾,促进经济结构转型。四川省在“三线一单”编制过程中,通过建立指标体系从生态环境保护的角度为地区高质量发展提供了量化标准,通过差异化管控要求为地区高质量发展提供了具体路径,从生态环境角度助力高质量发展。     

“互联网+”智慧环保生态环境多元感知体系发展分析

在大数据技术以及信息化快速稳定持续发展的实践背景之下,"互联网+"智慧环保发展时代的悄然来临,使得对"互联网+"智慧环保多元感知体系的研究与发展工作,逐步被提升到了极其重要的地位。文章结合雄安新区生态环境智慧监测体系建设项目,展开了简要的阐释分析。     

肥煤自燃全过程热动力学特征参数研究

实验测定了林西矿肥煤样品30~900℃煤自燃全过程热动力学特征参数,得出:TG/DTG曲线显示煤样DTG初始临界温度45℃,干裂温度122℃,活性温度195℃,增速温度265℃,质量极大值温度342℃,着火温度465℃,最大热失重速率温度515℃和燃尽温度690℃;DSC曲线显示,煤样初始放热温度60℃、最大热释放速率温度511℃。结合TG-DTG-DSC曲线综合分析可知,煤温达到510℃左右时煤样反应最剧烈。由煤自燃标志气体测定实验系统得出:煤温130℃后CO,CO 2释放量迅速增加,210℃增加速度下降;CH 4,C 2 H 6含量变化具有规律性且两者变化相近;C 2 H 4出现温度为130℃;C 2 H 4/C 2 H 6比值在190~350℃有较强的规律性,呈上升趋势且上升速度较快;350℃之后,CH 4,C 2 H 6,C 2 H 4体积分数均开始急剧增大;C 2 H 4/CO与C 2 H 4/CO 2变化趋势大致相同,在130~350℃时缓慢增长,达到350℃后比值呈指数形式上升。经拟合曲线,得到活化能的3个突变点温度:70,180,220℃,其中180℃与交叉点温度相吻合。通过以上研究,得到了肥煤自燃全过程的热力学特征参数,为实际生产中防治煤自燃提供了理论依据。     

江苏省太湖流域水生态健康评估的初步实践及展望

阐述了水生态健康的内涵与意义,从江苏省率先在太湖流域开展水生态环境功能分区管理的顶层设计,构建以水生态健康指标为核心的水生态健康评估技术体系,地方对照水生态环境功能区划的水生态分级管控目标开展的应用与实践结果等3个方面,回顾了江苏省太湖流域水生态健康评估工作的主要进展,提出了完善水生态健康评估技术体系和推进流域水生态健康评估工作的建议。     

Usability of non-standard lower anchor configurations for child restraint system (CRS) installation

Abstract

Objectives: The objective of this study was to determine whether the amount of tension required for proper child restraint system (CRS) installation varies with lower anchor spacing and to determine whether nonexperts can produce adequate tension on wider-than-standard lower anchor configurations.

Methods: CRSs were installed by certified child passenger safety technicians (CPSTs; n?=?6 subjects, n?=?72 installations) and nonexperts (n?=?30 subjects, n?=?120 installations) on a mock-up vehicle seat fixture with lower anchors set at 11 (standard), 15, 19, and 23 in. apart from one another. Each CPST installed a rear-facing (RF) infant base, RF convertible, and forward-facing (FF) convertible into each of the 4 spacing configurations in random order. The CPSTs were instructed to tighten the lower connector strap until the tension was exactly at the threshold between passing and failing the 1-in. test. Each nonexpert installed one CRS model into all 4 spacing conditions in random order. Nonexperts were instructed to install the CRS to the best of their ability. The tension produced on the lower connector strap was recorded via load cell in the lower anchor assembly of the vehicle seat. Resultant tension magnitudes were compared across spacing conditions using matched pair t-tests. The CPSTs’ mean 1-in. test threshold values were compared to tensions produced by nonexperts. Installations were visually evaluated for errors and qualitative usability feedback was collected via survey.

Results: CPSTs installed the infant base with higher tensions in the 15-, 19-, and 23-in. configurations compared to the standard 11-in. configuration (P = .034, .032, and .003, respectively). The nonexperts installed the infant base with higher tension in the 15- and 23-in. configurations compared to the 11-in. configuration (P = .004 and .026, respectively). The RF convertible and FF convertible installations showed no significant differences in tension among any of the spacing configurations for either group. Only 19% of the nonexperts’ installations were tight enough to pass CPST thresholds, and the pass rate did not vary with respect to lower anchor spacing. In feedback surveys, the nonexpert group did not show a consistent preference for either standard or wider-than-standard lower anchor configurations.

Conclusions: The amount of tension required to pass the 1-in. rule did not vary with lower anchor spacing configurations for the RF and FF convertible CRS, but the infant base required more tension in wider anchor configurations. Nonexperts tended to produce less than ideal tension in all configurations, although their tension magnitudes increased for the infant base in wider configurations.     

Carbon trading thickness and market efficiency in a socialist market economy

Unlike the European Union emission trade system (EU ETS), China’s pilot ETSs implemented diversified policy designs instead of using a uniform framework. Variance ratio test is used to evaluate the Efficient Market Hypothesis (EMH) in China’s carbon trading markets. The results of two versions of variance ratio tests indicate that the carbon trading market in Hubei is considered weak form efficient, and the socialist market economy does not necessarily lead to market inefficiency in carbon trading markets. Thin trading activities generate market frictions and bias the Efficient Market Hypothesis (EMH) tests.     

重大基坑坍塌事故虚拟仿真系统研究

为预防基坑坍塌事故发生、进行重大事故警示教育，以杭州地铁湘湖站北2基坑坍塌事故为素材，研究构建重大基坑坍塌事故虚拟仿真培训系统。对案例事故涉及的设计、施工、环境三大因素的技术问题进行总结，研究了事故链各致险因素及对推动事故发生所起作用，完成仿真系统平台设计和开发工作。系统应用多种制作技术创建工程场景模型，展示深基坑工程复杂的施工工序和空间关系，再现基坑坍塌事故发生发展过程和贴近实际的灾难场景。研究结果表明:仿真系统成果可丰富地下工程教学、施工现场安全教育和安全监察培训的内容和形式。     

环境监测点位“组合校验码”编码模型及编码管理系统设计

分析了环境监测点位编码管理中存在的问题,提出科学合理的编码应该是具有科学性、唯一性、稳定性、简明性、规范性、可扩展性等特点。设计了一种简单"组合校验码"模型来适应不同环境要素类型的环境监测工作需要。同时,设计了一套覆盖各层级环境监测机构,各种环境要素类型,适应市场化监测服务,满足不同点位管控类别的编码管理系统来支撑"组合校验码"模型的使用,通过该系统可以有效解决环境监测数据集成程度低、共享困难等问题。     

空气质量多模式预报系统在中山市的应用

介绍了中山市空气质量多模式预报系统。对2015年3月—2016年2月的预报效果评估表明:系统可以较好地反映污染物的变化趋势但仍存在系统性偏差。通过对排放源清单的调整优化及对模式干沉降模块的改进使模式系统的偏差显著减小。总结并建立中山市污染天气案例库,发现在典型污染天气形势下,除O3-8 h外,其他污染物均值均能达到空气质量二级标准。未来将从2个方面提高中山市空气质量预报预警系统的实用性,包括逐步实现污染源排放清单的动态及时更新和提高极端气象条件下O3污染预报能力。     

A comparative study of vocational education and occupational safety and health training in China and the UK

In order to enhance Chinese workers’ occupational safety awareness, it is essential to learn from developed countries’ experiences. This article investigates thoroughly occupational safety and health (OSH) in China and the UK; moreover, the article performs a comparison of Chinese and British OSH training-related laws, regulations and education system. The following conclusions are drawn: China’s work safety continues to improve, but there is still a large gap compared with the UK. In China a relatively complete vocational education and training (VET) system has been established. However, there exist some defects in OSH. In the UK, the employer will not only pay attention to employees’ physiological health, but also to their mental health. The UK’s VET is characterized by classification and grading management, which helps integrate OSH into the whole education system. China can learn from the UK in the development of policies, VET and OSH training.